Good Wednesday morning my fellow stampers. How is your week going?
For today’s card I used the Stampin’ Up Incredible Like You Photopolymer Stamp Set. I love the sentiments in this set and the floral image is so pretty. Take a look.
For my card I also played along with 3 challenges. The first is Just Add Ink Challenge #445. Be sure to stop by to see what everyone had made. Their challenge was Just Add Embossing, which I did. I heat embossed and I used an embossing folder.
Next I played along with Hand Stamped Sentiments challenge # 309. Be sure to stop by and play along with their challenge and see what everyone has made. Theirs is a color challenge, and the colors are beautiful together.
Last is What Will You Stamp challenge #208. Theirs is a specific stamp set you must use. Be sure to stop by and play along with them too.
I started by stamping the sentiment from Incredible Like You stamp set in Pool Party Ink on a small piece of Whisper White cardstock. I immediately sprinkled it with Clear Stampin’ Emboss Powder and heat set it with my Heat Tool. You can emboss in any color when you use clear embossing powder. I then stamped the stems from the same stamp set in Soft Sea Foam Ink around the bottom of the sentiment, then stamped the flowers, from the same stamp set, on the stems in Highland Heather Ink. Using my Big Shot and the oval from the Stitched Shapes Framelits Dies, I cut the sentiment out and set it aside.
On a panel of Pool Party cardstock I stamped the flowers from the Incredible Like You stamp set in Pool Party Ink. I stamped the inside of the flower stamping off once then stamped the second part of the flower full strength Pool Party Ink. I stamped the leaf image from the same stamp set in Soft Sea Foam Ink randomly around. I ran the Pool Party panel through my Big Shot using the Subtle Dynamic Textured Impressions Embossing Folder to give it a little more texture.

I adhered the card front to a Highland Heather mat using Multipurpose Liquid Glue. I wrapped a piece of 3/8″ Silver Metallic Edge Ribbon around the center of the card front. I adhered the stitched oval with the sentiment to the card front using Stampin’ Dimensionals and adhered the card front to a Soft Sea Foam card base using Stampin’ Dimensionals. I added a few Clear Rhinestone Basic Jewels to the card front.
On the inside I stamped the stems and flowers from the Incredible Like You stamp set in Soft Sea Foam and Highland Heather Inks on the bottom of a Whisper White cardstock panel. I stamped the larger flower in the center of the Whisper White panel in Pool Party Ink, stamping the inside colored part off twice and the second part of the flower stamping off once. I stamped the sentiment from Stampin’ Up Itty Bitty Birthday Stamp Set in Highland Heather Ink over the top of the flower. I adhered the Whisper White panel to a Highland Heather mat using Snail and then to the inside of the Soft Sea Foam card base using Multipurpose Liquid Glue.


To finish my card I decorated a Medium Whisper White Envelope. I stamped the stems and flowers from the Incredible Like You stamp set on the bottom of the envelope front the same as I did on my card. I stamped the larger flower image in Pool Party Ink on the envelope flap.
Thank you so much for stopping by my blog today. I hope you liked my card and will give it a try. Happy Stamping!!
If you need any stamping supplies, I’d be very happy to be your Demonstrator. Just click here to go directly to my online store or drop me an email if you have any questions.
MY CURRENT HOST CODE IS: EDKNVWRP
Happy Stamping, Karen!
****************************************************************************************************
![]()
Paper Pumpkin is turning six and we want to celebrate with you! After all, we could not have shared all these years of creativity if it weren’t for our subscribers.
To celebrate this fun occasion and to thank everyone who supports Paper Pumpkin month after month, we’re offering a specially-designed March kit and a FREE STAMP SET. Oh, yes. You read that right. In March, you will receive TWO stamp sets with your Paper Pumpkin kit.
There has never been a better time to give Paper Pumpkin a try. And because it’s our sixth birthday celebration, we’ll be pulling out all the stops. You’ll get an adorable kit, a special box, and most importantly, you’ll get TWO stamp sets instead of one.
$20 for a Paper Pumpkin kit is always a steal, but in March the deal is even better! There has never been a better time for you to join Paper Pumpkin.
Because it’s our birthday, we decided to create a kit that is perfect for making birthday cards!
The March kit features eight full-sized, mailable cards
Coordinating colors are Basic Black, Bermuda Bay, Daffodil Delight, Flirty Flamingo, and Poppy Parade
This kit has an element that is sure to “pop”!
The FREE stamp set is even bigger and better than your typical Paper Pumpkin stamp set and can be used on a variety of crafting projects.
A subscriber must have an active subscription by March 10, 2019 in order to receive the March kit.
The FREE stamp set coordinates with the March kit but it is not needed to complete the projects.
Supplies may be limited toward the end of the subscription period, so DON’T WAIT.
Click HERE to go to my store and subscribe.
****************************************************************************************************
April I will be starting my Online Host Club and I have a couple spots open. If you have a long wish list and you want to purchase Stampin’ Up supplies a little at a time, this might just be the perfect solution for you. For more information click HERE. If you are interested in joining in, please email me at creativestampingdesigns@gmail.com.
****************************************************************************************************
Card stock cuts for this project:
- Highland Heather Cardstock 2 – 4″ X 5 1/4″ (card front and inner liner mats)
- Pool Party Cardstock 3 3/4″ X 5″ (card front)
- Soft Sea Foam Cardstock 4 1/4″ X 11″ (card base scored and folded at 5 1/2″)
- Whisper White Cardstock 3 3/4″ X 5″ (inner liner), piece for stitched oval
****************************************************************************************************
Product List






























I played along with 
I started with a Melon Mambo card base and adhered a panel of How Sweet It Is Designer Series Paper using Multipurpose Liquid Glue. I took a strip of Melon Mambo cardstock and wrapped a piece of the Coastal Cabana/Granny Apple Green 3/8″ Reversible Ribbon around it and tied a bow. I adhered the strip to the left side of my card using Stampin’ Dimensionals.
I stamped one of the candy jars from the Sweetest Thing stamp set in Tuxedo Black Memento Ink on a scrap piece of Whisper White cardstock. I then stamped the gummy bears, from the same stamp set, inside the jar in Tuxedo Black Memento Ink and colored them in with my Coastal Cabana, Granny Apple Green and Melon Mambo Stampin’ Write Markers. Using my Big Shot I cut the candy jar out with my Jar Of Sweets Framelits Dies. I adhered the jar, using Stampin’ Dimensionals, to an oval which I cut out using the largest Stitched Shapes Framelits Dies in Granny Apple Green cardstock. Using Multipurpose Liquid Glue, I adhered the oval just under the Melon Mambo strip. I stamped the sentiment in Granny Apple Green on another scrap of Whisper White cardstock and cut it out using the smallest oval from the Stitched Shapes Framelits Dies. I cut the smallest scalloped oval from the Layering Ovals Framelits Dies in Melon Mambo cardstock. I adhered the stitched oval to the center of the scalloped oval using Snail then to the card front using Stampin’ Dimensionals. I added a few Glitter Enamel Dots to the card front in Coastal Cabana, Granny Apple Green and Melon Mambo.
On the inside I stamped the sentiment from the Sweetest Thing stamp set in Granny Apple Green in the center of a Whisper White panel. I stamped the gummy bears from the same stamp set along the bottom of the panel and colored them in the same as I did on the card front. I adhered the Whisper White panel to a Granny Apple Green mat using Snail then adhered it to the inside of the Melon Mambo card base using Multipurpose Liquid Glue.













I also joined in with a couple challenges today. 1st is the
The next is
I started by adhering a piece of Wood Textures Designer Series Paper to a panel of Pear Pizzazz cardstock using Snail. On another smaller piece of Wood Textures DSP I stamped the little boy with the ducks from the Heartland stamp set in Tuxedo Black Memento Ink on the right side. I colored the little boy in with my Pear Pizzazz Stampin’ Write Marker and my light Daffodil Delight Stampin’ Blends Marker. I then adhered the panel to the bottom of the Pear Pizzazz card front using Snail.
I wrapped a piece of Linen Thread around the seam twice and tied a small bow. I adhered the card front to a So Saffron card base using Stampin’ Dimensionals.
On a small piece of Whisper White cardstock I stamped the tractor with the dog from the Heartland stamp set in Tuxedo Black Memento Ink. I colored the tractor in using my Pear Pizzazz Stampin’ Write Marker and my Dark Daffodil Delight Stampn’ Blends Marker. Using my Big Shot, I cut the image out with my Square Stitched Shaped Framelits Dies and I adhered it to the card front using Stampin’ Dimensionals.
On the inside I stamped the tractor image from the Heartland stamp set in Early Espresso Ink, stamping off twice, in the center of a Whisper White panel. I stamped the sentiment from the Stampin’ Up Part Of My Story Stamp Set in Pear Pizzazz Ink over the tractor. This stamp set is a Sale-A-Bration item free with a $50 order.















I made a bow from the Old Olive Linen Thread and adhered it to the side of the label using a Glue Dot. I added a few Pearl Basic Jewels to the card front.
On the inside I stamped the sentiments from the Lasting Lily stamp set in Blackberry Bliss Ink on a Whisper White panel. I adhered the Whisper White panel to an Old Olive mat using Snail and then to the inside of the Blackberry Bliss card base using Multipurpose Liquid Glue.
To finish my card I decorated a Medium Whisper White Envelope. I stamped the lily’s from the Lasting Lily stamp set the same as I did for the card front on the front of the envelope.










I joined in with the
I also joined in with the 
I started with a panel of Whisper White cardstock and stamped the succulent flower image from the Painted Seasons stamp set in Blushing Bride Ink randomly around the paper. I stamped the star clusters from the same stamp set in Cherry Cobbler Ink around filling in empty spaces. I adhered the artwork panel to a Blushing Bride mat using Snail. I adhered the matted artwork to a Thick Whisper White card base using Multipurpose Liquid Glue.
I stamped the sentiment from the Stampin’ Up By The Bay Stamp Set, FREE Sale-A-Bration item with a $50.00 order, in Cherry Cobbler Ink on the bottom right of the card front. I added 3 Rhinestone Basic Jewels that I had colored in with my Dark Cherry Cobbler Stampin’ Blend Marker, to the top corner of the card front.
On the inside I stamped the succulent flower image from the Painted Seasons stamp set in Blushing Bride Ink on the two corners of a Whisper White panel. I stamped the star clusters from the same stamp set in Cherry Cobbler Ink by the flowers. I stamped the sentiment from the By The Bay stamp set in Cherry Cobbler Ink in the center of the panel. I adhered the Whisper White panel to the inside of the Thick Whisper White card base using Multipurpose Liquid Glue.







I joined in with the
I started with a Smoky Slate card front and ran it through my Big Shot using the Subtle Dynamic Textured Impressions Embossing Folder.
Using the soon to be available from the Sale-A-Bration Coordination collection, Story Label Punch (available March 1st), I punched a label out in Melon Mambo cardstock. I stamped the sentiment from the Stampin’ Up Part Of My Story Stamp Set (Free Sale-A-Bration item) in Versamark Ink on a strip of Whisper White cardstock. I sprinkled it immediately with my Black Stampin’ Emboss Powder and heat set it with my Heat Tool. I adhered the sentiment to the label and trimmed the ends to the label. I added a Heart Epoxy Droplet, which I colored with my Dark Lovely Lipstick Stampin’ Blend Marker (that was the closest to Melon Mambo I could get). I adhered the label to the right of my artwork with Stampin’ Dimensionals.
On the inside I stamped the flower from the Painted Seasons stamp set in Melon Mambo Ink on the two corners of a panel of Whisper White cardstock. I added a couple of the star clusters from the same stamp set in Tuxedo Black Memento Ink by the flowers. I stamped the sentiment from the Stampin’ Up Itty Bitty Birthdays Stamp Set in Tuxedo Black Memento Ink in the center of the panel. I adhered the Whisper White panel to a Melon Mambo mat using Snail and adhered it to the inside of the Smoky Slate card base using Multipurpose Liquid Glue.




I joined in with 2 challenges today also. First I played along with
Second I played along with
I started with a Blushing Bride card front and stamped the sentiment from the Stampin’ Up Butterfly Gala Stamp Set in Tuxedo Black Memento Ink on the right side.
I took a small panel of Lovely Lipstick cardstock and ran it through my Big Shot with the Petal Pair Textured Impressions Embossing Folder. I adhered the embossed panel to the right side of the card front, up against the edge, using Multipurpose Liquid Glue.
I stamped one of the small butterflies from the Butterfly Gala stamp set 3 times on a piece of Whisper White cardstock in Tuxedo Black Memento Ink. I then stamped the inside of each of the butterflies in Grapefruit Grove Ink. I punched the butterflies out using my Butterfly Duet Punch (which unfortunately is currently on backorder) and adhered them to the embossed panel using Glue Dots. I added a Black Faceted Dots to each of the butterflies and bent their wings up a little. I adhered the card front to a Blushing Bride card base using Stampin’ Dimensionals.
On the inside I stamped the sentiment from the Stampin’ Up Bright Wishes Stamp Set in Tuxedo Black Memento Ink in the center of a Whisper White panel. I stamped 3 more butterflies from the Butterfly Gala stamp set in Tuxedo Black Memento Ink on a piece of Whisper White cardstock. I stamped the top portion of 2 of the butterflies and bottom portion of 1 butterfly in Lovely Lipstick Ink. I stamped the top portion of 1 butterfly and bottom portion of 2 butterflies in Grapefruit Grove Ink then punched all 3 butterflies out using the Butterfly Duet Punch. I adhered the butterflies around the sentiment using Multipurpose Liquid Glue.












and here is ‘Just Us Girls’ Challenge
I started with a panel of Wood Textures Designer Series Paper and adhered it to a Crumb Cake card base using Multipurpose Liquid Glue.
On a panel of Whisper White cardstock I stamped the house image from the Stampin’ Up By The Bay Stamp Set in Tuxedo Black Memento Ink. This beautiful stamp set is a FREE item with a $50 order during Sale-A-Bration. I just love this image and would absolutely love to be in that house looking out at the bay right now. On a smaller piece of Whisper White cardstock I stamped the seagull image in Tuxedo Black Memento Ink. Using my Aqua Painter filled with Alcohol, I water colored the images in using Balmy Blue, Cajun Craze, Crumb Cake, Gray Granite, Pacific Point, Pear Pizzazz, Sahara Sand, Smoky Slate and Soft Suede Inks. To get the ink I squeezed the stamp pad before opening it so that ink goes on the inside of the lid. I used my Aqua Painter to pick up the ink to color my picture with. When I was done with each color, I wiped the lid with paper towel to make sure ALL alcohol was off the lid before closing it. You do not want to get alcohol in your ink. Once I was done watercoloring my pictures I cut them out using the Layering Oval Framelits Dies and my Big Shot. I adhered the house and bay image to the card front using Multipurpose Liquid Glue and I adhered the seagull image using Stampin’ Dimensionals.
On a small strip of Whisper White cardstock I stamped the sentiment from the By The Bay stamp set in Soft Suede Ink. I stamped the seashell from the same stamp set to the right of the sentiment in Crumb Cake Ink. I edged the strip using my Crumb Cake Stampin’ Write Marker to give it a little dimension. I then adhered the sentiment to the card front, sliding it under the seagull image, using Multipurpose Liquid Glue. I attached a small bow made of Linen Thread to the sentiment strip using a Glue Dot.
On the inside I stamped the house image from By The Bay stamp set in Crumb Cake Ink, stamping it off once, in the center of a Whisper White panel. I stamped the sentiment from the same stamp set in Soft Suede Ink over the house image.










I am really loving my Stamparatus. I used it for this card and envelope and was able to line everything up perfectly. I started with a Whisper White card front and stamped the floral image from Forever Lovely stamp set. I first stamped the leaf image in Soft Sea Foam Ink. I then stamped the floral image, lining it up using my Stamparatus, in Petal Pink Ink.
I wrapped a piece of the gorgeous new Petal Pink/Whisper White Variegated Ribbon around the card front and tied a bow. This ribbon is so wonderful to work with and makes bows so easy. I added a Glue Dot under the bow to hold it in place. I added a few clear Rhinestone Basic Jewels to the card front by the flowers.
I stamped the sentiment from the Meant To Be stamp set in Petal Pink on a small piece of Whisper White cardstock and punched it out with the Pretty Label Punch. I adhered it to the card front using Stampin’ Dimensionals. I adhered the card front to a Whisper White card base using Stampin’ Dimensionals.
It is extremely hard to see, but I stamped the leaves and floral design, from the Forever Lovely stamp set, the same way I did on the card front, stamping off once, on the inside Whisper White panel. I stamped the sentiment from the Forever Lovely stamp set in Petal Pink Ink over the floral image. I adhered the Whisper White panel to the inside of the Whisper White card base using Snail.






For my card today I joined
I started by layering a panel of the Lovely Lipstick Foil Sheet and a panel of Animal Expedition Designer Series Paper on a Lemon Lime Twist card base. I decided where I wanted the peek-a-boo circle and placed my Layering Circles Framelits Dies on top of the card front. Using my Big Shot I ran it through all 3 layers, going through a couple of times to make sure it cut all the way through. I adhered the Lovely Lipstick Foil Sheet on the Lemon Lime Twist card base using Multipurpose Liquid Glue and the Animal Expedition DSP on the Foil Sheet using Multipurpose Liquid Glue. Using my Big Shot again, I cut the scallop circle from the Layering Circles Framelits Dies that was larger than the card front circle out of Lovely Lipstick Foil Sheet. I adhered the scallop circle over the card front circle using Multipurpose Liquid Glue.
On a scrap piece of Whisper White cardstock I stamped the dog with balloon image from the Bella and Friends stamp set in Tuxedo Black Memento Ink. I colored the image in using my Call Me Clover, Calypso Coral, Crumb Cake, Granny Apple Green, Mango Melody, Pool Party and Rich Razzleberry Stampin’ Blends Markers. I then fussy cut the image using my Paper Snips.
On the inside I stamped the kitty in the flower-pot image from the Pretty Kitty stamp set in Tuxedo Black Memento Ink on a Whisper White panel. I lined it up and stamped it so that it would be peeking through the card front circle. I colored the kitty in using my Call Me Clover, Calypso Coral, Mango Melody, Petal Pink, Pool Party, Rich Razzleberry and Smoky Slate Stampin’ Blends Markers. I adhered the Whisper White panel to a Berry Burst mat using Snail and adhered it to the inside of the Lemon Lime Twist card base using Multipurpose Liquid Glue. I stamped the sentiment from the Pretty Kitty stamp set on a scrap of Whisper White cardstock in Berry Burst Ink. I cut the sentiment out using the oval from the Stitched Shapes Framelits Dies. I cut a scalloped oval from the Layering Ovals Framelits Dies, that was just larger than the stitched oval, out of the Lovely Lipstick Foil Sheet. I adhered the stitched oval to the scalloped oval using Snail and adhered it to the inner liner using Multipurpose Liquid Glue.



















